Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-10S
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100BX700-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 700mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke700 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-10S
The AirTAC SAIJ100X700-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster.
This variant includes a SUS304 stainless steel rod for superior corrosion resistance and a magnetic piston (-S) for position sensing. It uses PT tapered ports and retains the standard extruded aluminum barrel with sensor grooves on both sides, accepting the reduced SAIJ mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-10S Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-10S Is Used
Machine Setup Fine-Tuning
Dial in the exact 690-700mm retract position during initial machine commissioning without swapping cylinders or fabricating external stopper blocks.
Product Size Changeovers
Quickly adjust the end-of-stroke position by up to 10mm on packaging lines running slightly different product lengths.
Corrosive Environment Actuation
Leverage the SUS304 stainless steel rod for pushing and pulling heavy loads in washdown or mildly corrosive industrial settings.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-10S the Right Cylinder?
The 10mm adjuster is ideal for dialing in exact end-stops during product changeovers without adding external stops. For load-holding without live air pressure, note that the rear adjuster acts only as a travel stop and not a lock; consider an AirTAC SAIL or BSAI cylinder instead.
When replacing an ISO 15552 cylinder, match the 100mm bore, 700mm stroke, PT port thread, and the desired mounting style. Because the stroke is 700mm, the 25mm rod diameter and M20x1.5 rod thread provide rigidity, but an external guide is highly recommended to prevent excessive side-loading on the long unsupported travel.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-10S FAQ
At 0.7 MPa, the push force increases to 5497N.
The rear adjuster screw allows you to shorten the nominal 700mm stroke by up to 10mm, providing a usable travel window of 690-700mm. The adjuster acts as a mechanical stop to fine-tune the end position and does not lock the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.