Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-50S
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100BX700-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 700mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke700 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-50S
The AirTAC SAIJ100X700-50-S is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 650 to 700 mm, letting you dial in the exact retract end-position during commissioning without adding external stops.
This unit includes a SUS304 stainless steel rod for corrosion resistance and a magnet for CMSE reed or DMSE electronic sensors. The extruded aluminum barrel incorporates sensor grooves on both sides, and the PT tapered ports ensure a tight pneumatic connection. It supports a speed range of 30-800 mm/s.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-50S Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-50S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-50S Is Used
Variable End-Stop Positioning
Fine-tune the 650-700 mm travel window during machine setup to hit precise retract positions on large fixtures without machining new stop blocks.
Product Size Changeover
Quickly adapt a conveyor line for different part lengths by dialing the rear screw up to 50 mm, minimizing downtime between production runs.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-50S the Right Cylinder?
Choose this 100 mm bore when a 63 mm bore (2182 N at 0.5 MPa) is insufficient for your load, but you want to avoid stepping up to a massive 125 mm body. The 50 mm adjustment window is ideal for product changeovers that require shifting the end-stop without swapping the cylinder. Because the stroke is 700 mm, an external guide is recommended to prevent side-load damage to the rod.
For ISO 15552 interchangeability, match the 100 mm bore, 700 mm stroke, 50 mm adjustment, G1/2 port, PT thread, and -S magnet. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air; for true load-holding, consider SAIL or BSAI cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-50S FAQ
At 0.5 MPa, the push force is 3927 N.
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke by up to 50 mm, creating a 650-700 mm usable travel window. It only sets the travel end and does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100BX700-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.