Airtac SAIJ100 Adjustable Cylinder SAIJ100BX800-10
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100BX800-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 800mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke800 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX800-10
The AirTAC SAIJ100X800-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster.
This specific SKU is configured with a SUS304 stainless steel rod (option B) for superior corrosion resistance and features PT tapered port threads (G1/2). The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting, while the M20x1.5 rod thread handles high side-load stresses effectively.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX800-10 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100BX800-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100BX800-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX800-10 Is Used
Machine Changeover
Fine-tune the 790-800mm travel end-stop during product size transitions without swapping out the entire actuator.
Long-Stroke Diverting
Adjust the exact retraction point of an 800mm stroke diverter arm to accommodate varying package dimensions.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX800-10 the Right Cylinder?
Choose this 100mm bore adjustable cylinder over a fixed SAI when you need precise end-position tuning at machine setup without adding external stops. If your application requires less force, stepping down to an 80mm bore yields 2513N at 0.5 MPa. Because the stroke is 800mm, an external guide is strongly recommended to prevent rod binding under heavy lateral loads.
Remember that the rear adjuster acts only as a travel stop, not a locking device; a plain SAIJ cannot hold a load without live air pressure. For drop-out prevention, consider the SAIL (air-released lock) or BSAI (clamp-lock) variants. To match this ISO 15552 interchangeable footprint, specify the 100mm bore, 800mm stroke, PT port, and desired mounting from the SAIJ set: Basic, FA, LB, TC, FTC, TCM1, or TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX800-10 FAQ
The maximum force at 1.0 MPa is 801 kgf.
The rear adjuster screw lets you shorten the effective travel by up to 10mm, creating a 790-800mm usable window. It acts as a mechanical stop to fine-tune the end position without live air holding the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100BX800-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.