Airtac SAIJ100 Adjustable Cylinder SAIJ100BX800-30
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100BX800-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 800mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke800 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX800-30
It features a SUS304 stainless steel rod and PT tapered ports. By turning the rear screw, you achieve a 770-800mm usable travel window, perfect for dialing in exact end positions without swapping hardware.
This 100mm bore actuator omits the FB, CA, CB, and CR mounting styles, utilizing a focused set of ISO 15552 interfaces including Basic, FA, LB, TC, FTC, TCM1, and TCM2. The extruded aluminum barrel includes sensor grooves on both sides, though this specific SKU lacks a magnet for CMSE or DMSE switches.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX800-30 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100BX800-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100BX800-30
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX800-30 Is Used
Machine Setup Changeover
Fine-tune the 770-800mm retract position during product family changeovers without disassembling tooling or adding external shims.
Variable End-Stop Positioning
Dial in the exact end-of-stroke location for automated assembly presses requiring precise 3927N clamping at 0.5 MPa.
Long-Stroke Material Handling
Actuate large diverter gates over an 800mm span, using the rear adjuster to synchronize stopping points across multiple lanes.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX800-30 the Right Cylinder?
The 30mm adjustment window is ideal for product changeovers, allowing you to fine-tune the retract end-stop during commissioning rather than machining external stops. If your process requires holding a load without live air pressure, note that this rear adjuster acts only as a travel stop, not a lock; you should select an SAIL or BSAI cylinder instead.
Because the 800mm stroke is lengthy, the 25mm rod should be guided externally to prevent excessive side-loading and premature seal wear. To match this ISO 15552 cylinder exactly, specify the 100mm bore, 800mm stroke, 30mm adjustment, PT port thread, SUS304 rod material, and no magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX800-30 FAQ
At 0.7 MPa, the push force increases to 5497N.
The rear adjuster screw allows you to shorten the effective stroke by up to 30mm, creating a 770-800mm usable travel window. It acts as a mechanical stop to fine-tune the end position and does not lock the load without air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100BX800-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.