Airtac SAIJ100 Adjustable Cylinder SAIJ100BX850-50
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100BX850-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 850mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke850 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX850-50
The AirTAC SAIJ100X850-50 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 850 mm stroke that can be fine-tuned backward by up to 50 mm, yielding a precise 800-850 mm usable travel window.
This unit features a SUS304 stainless steel rod for superior corrosion resistance and operates with PT tapered ports. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. Because the stroke extends to 850 mm, the 25 mm rod diameter should be paired with an external guide to prevent excessive side loading on the piston.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX850-50 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100BX850-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 850 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100BX850-50
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×850 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX850-50 Is Used
Product Size Changeovers
Dial in the exact 800-850 mm end position during packaging line format changes without physically replacing the cylinder or adding external mechanical stops.
Corrosive Assembly Presses
Leverages the SUS304 stainless steel rod for moisture-resistant actuation while applying up to 801 kgf of maximum pressing force in humid manufacturing environments.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX850-50 the Right Cylinder?
The 50 mm rear adjuster is ideal for product changeovers, allowing operators to dial in the exact end-of-stroke position from 800 to 850 mm without swapping hardware. For fixed-travel needs without commissioning adjustments, the standard SAI cylinder is a simpler alternative.
When replacing an ISO 15552 cylinder, match the 100 mm bore, 850 mm stroke, PT port thread, and mounting style. SAIJ supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, deliberately omitting FB, CA, CB, and CR options. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air; for dead-air load holding, consider an AirTAC SAIL or BSAI cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX850-50 FAQ
At its maximum 1.0 MPa pressure, it delivers up to 801 kgf of push force.
The rear adjuster screw acts as an external stopper that trims the effective travel back from the 850 mm nominal stroke, creating a usable 800-850 mm window. It decelerates the piston at the retract end but does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100BX850-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.