Airtac SAIJ100 Adjustable Cylinder SAIJ100BX90-30S
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100BX90-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 90mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke90 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX90-30S
The AirTAC SAIJ100X90-30-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 60-90 mm usable travel window. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.
This specific SKU is configured with a SUS304 stainless steel rod for superior corrosion resistance and a PT tapered port thread. The integrated magnet supports position sensing via AirTAC CMSE reed or DMSE electronic switches. It shares the exact mounting footprint of standard ISO 15552 cylinders, allowing straightforward dimensionally interchangeable upgrades.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX90-30S Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100BX90-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100BX90-30S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX90-30S Is Used
Product Changeover
Quickly dial in the 60-90 mm travel window when switching between product sizes on a packaging line, avoiding mechanical rebuilds.
Press Fit Tuning
Fine-tune the end-stop during commissioning to achieve precise pressing forces without adding external shims or physical stops.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX90-30S the Right Cylinder?
The adjustable 30 mm stroke is ideal for dialing in exact end positions during machine setup or product changeover without swapping cylinders. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Remember that the rear adjuster acts only as a travel stop to set deceleration, not as a lock. If your application requires load-holding without live air pressure, consider an AirTAC SAIL or BSAI cylinder. For exact ISO 15552 replacement matching, verify the 100 mm bore, 90 mm stroke, 30 mm adjustment, PT ports, and -S magnet requirement.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX90-30S FAQ
At the maximum 1.0 MPa pressure, it delivers up to 801 kgf.
The rear adjuster screw allows you to shorten the 90 mm nominal stroke by up to 30 mm, creating a 60-90 mm usable travel window. This stopper fine-tunes the end position but does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100BX90-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.