Airtac SAIJ100 Adjustable Cylinder SAIJ100BX900-10
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100BX900-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 900mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke900 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX900-10
The AirTAC SAIJ100X900-10 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 900 mm travel that can be fine-tuned backward by up to 10 mm, yielding a usable end-position window of 890 to 900 mm.
This adjustable model omits the FB, CA, CB, and CR mounting options, utilizing a focused set of ISO 15552 interfaces (Basic, FA, LB, TC, FTC, TCM1, TCM2). The rear adjuster acts purely as a mechanical stop to dial in the retract end position during commissioning; it does not hold the load without live air pressure.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX900-10 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100BX900-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 900 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100BX900-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX900-10 Is Used
Machine Setup Calibration
Dial in the exact 890-900 mm retract position during initial commissioning to perfectly align heavy tooling without machining custom spacer blocks.
Product Changeover
Quickly adapt the end-stop for different product lengths on a high-thrust handling line, shifting the travel limit by up to 10 mm in seconds.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX900-10 the Right Cylinder?
Because the 900 mm stroke is long, an external guide is recommended to prevent excessive side-loading on the 25 mm rod.
When replacing an ISO 15552 cylinder, match the 100 mm bore, 900 mm stroke, PT tapered port threads, and the appropriate mounting accessory. Note that the rear adjuster is a travel stop, not a locking mechanism; for load-holding without live air, consider the AirTAC SAIL or BSAI series instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX900-10 FAQ
At 0.7 MPa, the push force increases to 5497 N.
A rear adjusting screw acts as a mechanical stop, allowing you to shorten the 900 mm nominal stroke by up to 10 mm. This creates an adjustable 890-900 mm travel window for fine-tuning the end position without replacing the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100BX900-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.