Airtac SAIJ100 Adjustable Cylinder SAIJ100BX95-30
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100BX95-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 95mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke95 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX95-30
The AirTAC SAIJ100X95-30 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster.
Equipped with a SUS304 stainless steel rod and PT tapered ports, this extruded aluminum barrel omits heavy tie-rod construction. The rear screw acts purely as a travel stop for end-position tuning and does not lock the load without live air pressure.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX95-30 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100BX95-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100BX95-30
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX95-30 Is Used
Variable End-Stop Tuning
Dial in the exact 65 to 95mm end position during machine commissioning without installing external physical stops on the frame.
Product Size Changeovers
Quickly adapt a packaging line to different carton depths by trimming the rear stroke up to 30mm to accommodate new formats.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX95-30 the Right Cylinder?
The adjustable 65-95mm window allows exact end-stop tuning without swapping cylinders. For load-holding without live air, select a SAIL or BSAI lock cylinder, as this adjuster is not a brake.
To replace an ISO 15552 cylinder, match the 100mm bore, 95mm stroke, 30mm adjustment, PT G1/2 port, and desired mounting from the SAIJ set: Basic, FA, LB, TC, FTC, TCM1, TCM2. Since the 95mm stroke is under 300mm, external side-load guides are less critical than on longer strokes, but the 25mm rod still handles standard lateral stress well.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX95-30 FAQ
At 0.7MPa, the push force increases to 5497N.
The rear adjuster screw allows you to shorten the 95mm nominal stroke by up to 30mm, creating a usable travel window of 65-95mm. It functions as a physical stop for end-position tuning and does not hold the load without air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100BX95-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.