Airtac SAIJ100 Adjustable Cylinder SAIJ100BX950-30
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100BX950-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 950mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke950 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX950-30
It features a SUS304 stainless steel rod and PT tapered port threads. The integrated rear stopper allows you to trim the effective travel, creating a precise 920-950mm usable window for exact end-position tuning.
Because the adjuster acts purely as a mechanical stop, it decelerates the retract stroke but does not lock the load without live air. For load-holding without pneumatic pressure, an external rod lock or a related SAIL cylinder is required. This bore size carries a 25mm rod with an M20x1.5 thread, providing substantial rigidity for heavy moving masses.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX950-30 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100BX950-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100BX950-30
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX950-30 Is Used
Machine Setup Tuning
Dial in the exact retract position within the 920-950mm window during initial machine commissioning without machining new stop blocks.
Product Size Changeover
Quickly adapt a heavy-duty press or lift station to varying product lengths by turning the rear adjuster on the fly.
Material Handling Stops
Provide a variable mechanical end-stop for large pallet positioning systems where the exact stopping distance needs occasional tweaking.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX950-30 the Right Cylinder?
The 30mm adjustment range is ideal for fine-tuning machinery during commissioning or product changeovers, eliminating the need to swap out a fixed-stroke SAI cylinder. To replace an existing ISO 15552 unit, match the 100mm bore, 950mm stroke, PT port threads, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
With a 950mm stroke, the unsupported piston rod is highly susceptible to side-loading and sagging. Even with the heavy 25mm rod, you must use an external guide rail to prevent premature seal wear and binding. Note that this cylinder operates without a magnet, so position sensing requires external limits rather than CMSE or DMSE switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX950-30 FAQ
At the maximum operating pressure of 0.9 MPa, the push force increases to 7068N.
The rear mechanical adjuster allows you to shorten the 950mm nominal stroke by up to 30mm, giving an effective travel range of 920-950mm. The adjuster acts as a travel stop and does not function as a lock to hold the load without air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100BX950-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.