
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X10-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 10mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a carbon steel piston rod and a PT tapered port thread. Because the nominal stroke is just 10 mm and the adjustment range is also 10 mm, you can dial the effective travel all the way down to a zero-stroke cushioned stop.
This rear screw acts purely as a travel stop to fine-tune the end position during commissioning; it does not lock the load without live air. The extruded aluminum barrel includes sensor grooves on both sides, and the integrated -S magnet pairs directly with AirTAC CMSE reed and DMSE electronic solid-state switches for precise position detection.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X10-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 0-10 mm contact depth for light pressing or seating operations during machine commissioning without swapping cylinders.
Use the rear stopper to fine-tune the retracted position on the fly, accommodating minor part tolerances without reprogramming the pneumatic valves.
Quickly adjust the stroke window during product changeovers on a line, ensuring precise physical stops for varying component heights.
Choose this 100 mm bore when you need substantial thrust in a very compact footprint, stepping up from a 63 mm bore that only provides 1559N at 0.5 MPa. The adjustable 0-10 mm travel window is ideal for short clamping or pressing actions where you must tune the exact contact distance on the machine without adding external shims. For load-holding without continuous air pressure, pair this cylinder with an external pilot-operated check valve or select an AirTAC SAIL or BSAI locking cylinder instead.
When replacing an ISO 15552 cylinder, match the 100 mm bore, 10 mm stroke, 10 mm adjustment, PT G1/2 port, and -S magnet. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2. The 25 mm rod and M20x1.5 thread handle high side loads well, though even short-stroke setups should ensure rigid mounting to absorb the 801 kgf peak capacity at 1.0 MPa.
Quick checklist
At 0.9 MPa, the push force increases to 7068N. The operational speed range for this 100 mm bore cylinder is 30-800 mm/s.
The rear adjuster screw allows you to shorten the 10 mm nominal stroke by up to 10 mm, creating a 0-10 mm usable travel window. This stopper sets the travel end and relies on the air cushion for deceleration, but it does not hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.