
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X100-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 100mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
Because the adjustment range equals the nominal stroke, you can dial the effective travel anywhere within a 0-100mm window. This extreme flexibility allows you to fine-tune end positions during commissioning without swapping out the physical cylinder.
It features a 25mm carbon steel rod with an M20x1.5 thread, paired with G1/2 PT ports and 36mm air cushions at both ends. The extruded aluminum barrel includes sensor grooves on both sides, though this configuration omits the magnet, so adding CMSE or DMSE switches requires the -S variant. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X100-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact travel distance during R&D by adjusting the rear stopper from 0 to 100mm, avoiding the need to fabricate multiple test cylinders.
Quickly adapt a packaging line to different carton lengths by turning the rear screw, shifting the end-of-stroke position without changing the mounting hardware.
Set precise retract limits on an assembly press where the workpiece height varies, using the adjuster as a hard mechanical stop for repeatable positioning.
The 100mm adjuster is ideal for prototyping or product lines requiring frequent size changeovers, acting as a variable end-stop rather than requiring a fixed SAI cylinder for every part length. Remember that the rear adjuster is a travel stop, not a lock; it will not hold the load without live air, so use a SAIL or BSAI cylinder if dead-load holding is required.
For ISO 15552 replacement matching, verify the 100mm bore, 100mm stroke, 0-100mm adjustment, G1/2 PT ports, and your preferred mounting kit. Since the stroke is 100mm, side-load stress is minimal, but the 25mm rod still requires external guiding if subjected to lateral forces.
Quick checklist
At 0.5 MPa, the push force is 3927N.
The rear adjuster acts as a mechanical stop that lets you shorten the effective stroke by up to 100mm, providing a usable travel window of 0-100mm. It only sets the travel end and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.