
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X100-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 100mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X100-100-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. Because this SKU carries a 100 mm adjustment code on a 100 mm nominal stroke, it provides a fully variable usable travel window of 0 to 100 mm. This allows you to dial in the exact retract end-position during commissioning without swapping hardware.
This bore size uses a G1/2 port and includes variable air cushions at both ends to manage kinetic energy. The -S suffix indicates an integrated magnet for position sensing via AirTAC CMSE reed or DMSE electronic switches. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. The rear adjuster acts purely as a mechanical stop and does not hold the load without live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X100-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial back the retract stroke from 100 mm down to 20 mm when switching to a smaller product format on the line, eliminating the need to physically swap cylinders.
Fine-tune the exact end-of-stroke position during machine commissioning to achieve perfect alignment without fabricating custom external stopper blocks.
Adjust the mechanical stop depth on the fly for pneumatic forming or pressing tasks that require different material compression distances per batch.
The 100 mm adjustment range on this specific SKU is ideal for product-size changeovers on a line where the retract distance varies drastically. Instead of installing a fixed SAI cylinder and adding external stops, the built-in adjuster handles the fine-tuning. To replace an ISO 15552 cylinder, match the 100 mm bore, 100 mm stroke, PT tapered port threads, and the -S magnet requirement.
Although the 100 mm stroke is relatively short, the M20x1.5 rod thread provides a robust interface for your mounting attachments. Remember that the rear adjuster is a travel stop, not a locking device. For load-holding without continuous air pressure, you must integrate an external rod lock or select a SAIL or BSAI series cylinder.
Quick checklist
The rear adjuster acts as a mechanical stop that lets you trim the effective stroke back by up to 100 mm. Since the nominal stroke is 100 mm, this gives you a usable travel window of 0 to 100 mm to set your exact retract end-position.
At the maximum 1.0 MPa pressure, the push force reaches 801 kgf.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.