
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X100-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 100mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X100-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The extruded aluminum barrel includes sensor grooves on both sides, and the -S suffix indicates an integrated magnet for direct compatibility with AirTAC CMSE reed and DMSE electronic solid-state switches.
This 100 mm bore model uses a G1/2 PT port and a robust 25 mm carbon steel rod with an M20x1.5 thread, providing excellent resistance against side loads. Instead of bolting on external stops or swapping components during a product changeover, the integrated rear screw allows you to dial in the retract distance. The adjuster acts purely as a travel stop, meaning the cylinder cannot hold a load without live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X100-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within a 90-100 mm window during machine commissioning without adding external mechanical stops.
Quickly adjust the cylinder's effective stroke by up to 10 mm on packaging lines handling slightly different product lengths.
The adjustable stroke is highly beneficial for machine setups requiring variable end stops, allowing you to trim the travel back by up to 10 mm without replacing the cylinder. For load-holding applications without continuous air pressure, this cylinder is not suitable; you should consider the SAIL (air-released lock) or BSAI (clamp-lock) variants, or utilize an external pilot-operated check valve.
When matching ISO 15552 dimensions for a replacement, verify the 100 mm bore, 100 mm stroke, 10 mm adjustment range, G1/2 PT port, and the -S magnet option. Standard mounting options for the SAIJ series include Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR configurations. Since the 25 mm rod handles side loads well, it still requires an external guide for unsupported loads, though at 100 mm stroke this is less critical than on longer travels.
Quick checklist
At its maximum 1.0 MPa pressure, it can deliver up to 801 kgf.
The rear adjuster screw acts as a mechanical stop that lets you shorten the nominal 100 mm stroke by up to 10 mm, providing an effective 90-100 mm travel window. It functions only as a travel stop and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.