
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X100-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 100mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X100-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel by up to 20 mm. This yields a usable stroke window of 80 to 100 mm, letting you dial in the exact retract end position during commissioning without adding external stops.
Built with a carbon steel piston rod and a G1/2 PT port, this extruded aluminum profile cylinder omits tie-rods for a clean sensor groove on both sides. The rear adjuster acts purely as a mechanical stop to set the travel limit and is not a locking device. For position holding without live air pressure, consider the SAIL or BSAI variants instead.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X100-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly modify the 80-100 mm retract distance when switching product sizes on a packaging line, avoiding the need to physically swap out the entire cylinder.
Fine-tune the end-of-stroke position during initial commissioning to perfectly align heavy clamping forces without machining custom external spacers.
The adjustable 80-100 mm window is ideal for product changeovers on a line, whereas a fixed-stroke SAI cylinder is better suited for applications with rigid, never-changing end positions. To match this ISO 15552 replacement exactly, verify the 100 mm bore, 100 mm nominal stroke, 20 mm adjustment range, PT G1/2 port, and mounting style.
Because this SKU lacks the -S magnet option, it cannot host CMSE or DMSE sensors. If electronic or reed switch detection is required for your setup, select the -S version. The 25 mm rod and M20x1.5 thread handle high side loads well, but even at 100 mm stroke, always use an external guide for heavy lateral loads.
Quick checklist
If you increase the operating pressure to 0.9 MPa, the push force reaches 7068 N.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 100 mm nominal stroke anywhere within an 80 to 100 mm window. It only sets the travel limit and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.