verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X100-20S

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X100-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 100mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke100 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$179.19 $194.97Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X100-20S

The AirTAC SAIJ100X100-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 100 mm nominal stroke that can be fine-tuned down by up to 20 mm, yielding an 80-100 mm usable travel window for precise end-position calibration.

This variant includes a position magnet for use with AirTAC CMSE reed and DMSE electronic sensors. Fluid control utilizes PT tapered ports sized at G1/2, while the extruded aluminum barrel features sensor grooves on both sides for flexible switch mounting.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X100-20S Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X100-20S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke100 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X100-20S

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×100Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X100-20S Is Used

precision_manufacturing

Precision End-Stop Tuning

Dial in the exact 80-100 mm retraction point during machine commissioning to achieve precise seating without machining custom spacers.

view_module

Product Size Changeovers

Quickly adjust the stroke by up to 20 mm on a packaging line to accommodate different product heights without changing the cylinder.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X100-20S the Right Cylinder?

Choose this 100 mm bore when an 80 mm bore falls short on power, as it upgrades your thrust from 2513 N to 3927 N at 0.5 MPa. The adjustable stroke is ideal for machine setups requiring variable end-stops or product changeovers, allowing you to dial in the exact 80-100 mm travel without adding external stops or swapping out a fixed-stroke SAI cylinder. When matching ISO 15552 replacements, verify the 100 mm bore, 100 mm stroke, 20 mm adjustment range, G1/2 PT ports, and the required -S magnet.

Although the 25 mm rod handles high side loads well, any application approaching the 100 mm stroke should still use an external guide to prevent binding. Remember that the rear adjuster acts only as a travel stop; it does not hold the load without live air pressure. For dead-load holding, consider an AirTAC SAIL or BSAI cylinder.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X100-20S FAQ

The rear adjuster acts as a mechanical stop that lets you trim the effective stroke by up to 20 mm. This creates an 80-100 mm adjustable travel window, allowing you to fine-tune the end position at commissioning without swapping the cylinder.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X100-20S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X100-20S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.