
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X100-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 100mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X100-30 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 100 mm stroke that can be fine-tuned backward by up to 30 mm, yielding a usable travel window of 70 to 100 mm.
This bore size features a robust 25 mm carbon steel rod with an M20x1.5 thread, paired with a G1/2 PT port for high flow. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to add CMSE or DMSE switches if needed. The rear stopper acts purely as a travel end deceleration device, not a lock, meaning live air is required to hold the load.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X100-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 70-100 mm travel window during line changeovers to accommodate different package sizes without replacing hardware.
Use the rear screw to precisely set the retraction point during machine commissioning, avoiding mechanical hard stops.
Choose this adjustable model when your assembly requires variable end-stops or frequent product-size changeovers, eliminating the need to swap cylinders or bolt on external stops. For higher thrust, a 125 mm bore provides 6133 N.
When replacing an ISO 15552 cylinder, match the 100 mm bore, 100 mm stroke, 30 mm adjustment range, G1/2 port, and mounting style. SAIJ supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, deliberately omitting FB, CA, CB, and CR. For load-holding without air pressure, consider an AirTAC SAIL or BSAI variant instead of relying on the adjuster.
Quick checklist
The rear adjuster screw allows you to shorten the effective travel by up to 30 mm. This creates a usable stroke window of 70 to 100 mm, letting you fine-tune the end position at commissioning without changing the cylinder.
At 0.7 MPa, the push force increases to 5497 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.