verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X100-40

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X100-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 100mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke100 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$173.95 $189.38Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X100-40

Its extruded aluminum barrel features sensor grooves on both sides, and the standard carbon steel rod handles robust duty cycles. With a G1/2 port and M20x1.5 rod thread, it provides a rigid interface for heavy loads.

This configuration provides a 60-100 mm usable travel window, letting you trim the nominal 100 mm stroke by up to 40 mm during commissioning. The rear stopper sets the retract end position without requiring external collars, while the standard PT tapered port ensures a tight pneumatic seal.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X100-40 Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X100-40
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke100 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X100-40

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×100Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X100-40 Is Used

tune

Product Changeovers

Dial in the 60-100 mm retract distance instantly when switching between part sizes on the line, avoiding physical cylinder swaps.

precision_manufacturing

End-Stop Calibration

Fine-tune the final retract position during machine setup using the rear screw, ensuring precise mechanical alignment without external stops.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X100-40 the Right Cylinder?

The 40 mm adjustment range is ideal for product changeovers, allowing you to dial in the exact retract distance on the fly instead of swapping to a fixed-stroke SAI cylinder. For load-holding without live air pressure, note that this adjuster acts only as a travel stop; you would need an external rod lock or a SAIL pneumatic lock cylinder instead.

As a dimensionally interchangeable ISO 15552 cylinder, it matches standard mounting footprints but uses a reduced SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Because the stroke is 100 mm, side-load risks are minimal, though the M20x1.5 rod thread still requires alignment to prevent premature seal wear. This SKU omits the -S magnet, so it cannot host CMSE or DMSE sensors without modification.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X100-40 FAQ

At 0.7 MPa, the push force increases to 5497N.

The rear adjuster acts as a mechanical stop, allowing you to shorten the 100 mm stroke anywhere down to 60 mm. It sets the travel end but does not lock the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X100-40

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X100-40 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.