verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X100-50

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X100-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 100mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke100 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$173.95 $189.38Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X100-50

By integrating a 50mm adjustment mechanism onto a 100mm nominal stroke, it creates a highly versatile 50-100mm usable travel window. This allows operators to dial in exact retract end positions directly at commissioning without swapping out the entire unit.

It features a robust 25mm carbon steel piston rod with an M20x1.5 thread, paired with PT tapered port threads and a G1/2 air supply. The extruded aluminum barrel includes sensor grooves on both sides, ready to accept CMSE reed or DMSE electronic switches if a magnet is specified later. Adjustment is handled via the rear stopper and variable air cushions at both ends, which set the travel limit but do not function as a locking device.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X100-50 Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X100-50
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke100 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X100-50

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×100Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X100-50 Is Used

tune

Product Changeover

Quickly shift the retract end position by up to 50mm to accommodate different product lengths on the same conveyor line without changing cylinders.

precision_manufacturing

End-Position Tuning

Fine-tune the 50-100mm travel window during machine commissioning to achieve exact material clamping or forming depths without external stop blocks.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X100-50 the Right Cylinder?

The 50mm adjustment range is particularly useful for product changeovers on a line, letting you shift the retract stop by up to 50mm rather than installing a fixed-stroke SAI cylinder of a different length.

When ordering a replacement, verify the 100mm stroke, 50mm adjust code, PT port thread, and the specific mounting style. SAIJ supports a reduced set of ISO 15552 mounts: Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options. Because the stroke is 100mm, side-loading is minimal, but always guide the load externally if it cannot be supported by the 25mm rod alone. Remember that the rear adjuster is a hard stop, not a lock; for dead-load holding without live air, select an SAIL or BSAI cylinder.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X100-50 FAQ

The rear adjuster acts as a mechanical stop that lets you trim the effective stroke within a 50-100mm travel window. It sets the end position but does not hold the load without continuous air pressure.

It operates at speeds between 30 and 800 mm/s.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X100-50

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X100-50 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.