
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X100-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 100mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
Because this SKU carries a 75mm adjustment code on a 100mm nominal stroke, you gain a wide usable travel window of 25-100mm. This allows precise end-position tuning at commissioning without swapping the cylinder or adding external stops.
The extruded aluminum barrel features sensor grooves on both sides, ready for CMSE or DMSE switches if a magnet is added later. This model uses a PT tapered port thread, a 25mm carbon steel rod with an M20x1.5 thread, and operates at speeds of 30-800 mm/s. The rear adjuster acts strictly as a travel stop for deceleration, not a lock, so live air is required to hold the load.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X100-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the retract distance from 25mm to 100mm instantly when switching between product sizes on the line.
Fine-tune the end-of-stroke position during machine setup without machining new spacer blocks.
Use the wide 75mm adjustment window to test multiple extend positions during prototype development.
The 75mm adjustment range is ideal for product-size changeovers on a line, letting you dial the retract end-stop from 25mm to 100mm without external mechanical stops. For a fixed end position, a standard SAI cylinder suffices, but the SAIJ variant excels when fine-tuning is required.
When replacing an ISO 15552 cylinder, match the 100mm bore, 100mm stroke, PT G1/2 port, and mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that SAIJ omits FB, CA, CB, and CR mounts. If your application requires holding a load without continuous air pressure, use an external rod lock or pilot-operated check valve, or select a SAIL or BSAI cylinder.
Quick checklist
At 0.7 MPa, the push force increases to 5497N.
The rear adjuster screw lets you trim the effective stroke within a 25-100mm window. It acts as a mechanical stop to set the end position, but it is not a lock, so continuous air pressure is needed to hold the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.