
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X1000-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 1000mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a carbon steel piston rod and PT tapered port threads. With a nominal 1000mm stroke and a 10mm adjustment range, it provides a usable travel window of 990-1000mm for exact end-position tuning.
The integrated rear stopper allows you to trim the retract position at commissioning without adding external stops. This model uses a reduced mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE reed or DMSE electronic switches if a magnet is specified later.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X1000-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dials in the exact 990-1000mm retract position on large fixture beds, absorbing minor mechanical drift without re-engineering the tooling.
Adjusts the end-stop on the fly for different pallet lengths on a 1000mm transfer line, keeping downtime minimal.
The 10mm adjustment window is perfect for fine-tuning machine setup or product changeovers without swapping a fixed-stroke SAI cylinder. Because the stroke is 1000mm, the 25mm rod requires an external guide to prevent excessive side-loading and premature seal wear.
To replace an ISO 15552 cylinder, match the 100mm bore, 1000mm stroke, 10mm adjustment, G3/8 port, and mounting style. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air; for dead-air load holding, use a SAIL or BSAI cylinder.
Quick checklist
At 0.7MPa, the push force increases to 5497N.
The rear adjuster screw lets you shorten the 1000mm stroke by up to 10mm, creating a 990-1000mm travel window. It acts as a mechanical stop and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.