
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X1000-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 1000mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
Its defining feature is the 100mm adjustment range, which creates a usable travel window of 900 to 1000mm. This allows you to dial in the exact retract end-position at commissioning without swapping out the entire actuator or adding external stops.
This model features a 25mm carbon steel piston rod and a G1/2 port. It retains the standard extruded aluminum barrel with sensor grooves on both sides, though no magnet is fitted to this variant. The rear screw acts purely as a travel stop for deceleration alongside the variable air cushions, not as a lock to hold the load without live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X1000-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tunes the retract distance by up to 100mm to accommodate different part lengths on a machining line without physically repositioning the cylinder.
Enables rapid adjustment of the 900 to 1000mm travel window during line format changes, reducing downtime when switching between product sizes.
Choose this 100mm bore actuator when an application requires heavy thrust up to 7068N at 0.9 MPa combined with variable end-stops for product changeovers. If you need less force, stepping down to an 80mm bore yields 4523N at 0.9 MPa. The adjustable stroke is ideal for fine-tuning machine setup, whereas a fixed SAI cylinder is preferred if the end position never changes. Because this unit lacks a magnet, position sensing requires external switches or a custom -S variant equipped for CMSE reed or DMSE electronic sensors.
When replacing an ISO 15552 cylinder, match the 100mm bore, 1000mm stroke, G1/2 PT ports, and the specific 100mm adjustment code. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2. Given the 1000mm stroke, the 25mm rod will experience leverage forces under load, so an external guide is strongly recommended to prevent excessive side-loading. For applications requiring the load to be held without continuous air pressure, consider the SAIL or BSAI locking cylinders instead.
Quick checklist
The operational speed range for this actuator is 30-800 mm/s.
The rear adjuster screw acts as a mechanical stop that lets you trim the effective travel back by up to 100mm, providing a usable stroke window of 900 to 1000mm. It sets the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.