verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X1000-20

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X1000-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 1000mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke1000 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$390.14 $420.16Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X1000-20

The AirTAC SAIJ100X1000-20 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a usable travel window of 980 to 1000 mm, allowing you to dial back the nominal 1000 mm stroke by up to 20 mm during commissioning.

This extruded aluminum profile cylinder features a 25 mm carbon steel piston rod and an M20x1.5 rod thread, offering substantial rigidity for demanding setups. The rear adjuster acts purely as a mechanical stop to fine-tune the end position without requiring external stops, while the standard PT G1/2 port ensures high flow capacity for its 30-800 mm/s speed range.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X1000-20 Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X1000-20
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke1000 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X1000-20

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×1000Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X1000-20 Is Used

straighten

Long-Stroke Positioning

Ideal for moving heavy jigs along a 980 to 1000 mm path, allowing exact retraction limits without machining custom external stoppers.

settings_input_component

Machine Changeover

Quickly fine-tune the retract end-stop by up to 20 mm when switching between product sizes on a high-force assembly line.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X1000-20 the Right Cylinder?

If you need less force, stepping down to an 80 mm bore yields 2513 N; if your load requires more, a 125 mm bore provides 6136 N. The adjustable-stroke design is ideal for product changeovers, whereas a fixed SAI cylinder is better for static, unchanging endpoints. Because the stroke is 1000 mm, an external guide is highly recommended to prevent excessive rod side-loading.

When specifying a replacement, verify the 100 mm bore, 1000 mm stroke, 20 mm adjustment range, PT G1/2 port, and the required mounting style. SAIJ supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. Note that the rear adjuster is a travel stop, not a lock; for load-holding without live air pressure, consider an AirTAC SAIL or BSAI cylinder.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X1000-20 FAQ

At a maximum 1.0 MPa, the push force reaches 801 kgf.

The rear mechanical adjuster allows you to shorten the effective travel from the nominal 1000 mm down to 980 mm. This provides a 980 to 1000 mm usable window for fine-tuning the end position during setup without swapping the cylinder.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X1000-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X1000-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.