
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X1000-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 1000mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a 25mm carbon steel piston rod and a G1/2 port. By turning the rear screw, you achieve a 970-1000mm usable travel window, enabling exact end-position tuning without swapping the cylinder.
This 1000mm unit relies on a 36mm adjustable air cushion at both ends to decelerate the load. The rear adjuster acts purely as a mechanical stop and does not hold the load without live air. For position holding, an external rod lock or a related SAIL pneumatic lock cylinder is required. The extruded aluminum barrel includes sensor grooves on both sides for adding CMSE or DMSE switches.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X1000-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 970-1000mm retract position on a large machining fixture to compensate for part tolerances during initial commissioning.
Fine-tune the end-stop distance on a 1000mm transfer arm to accommodate varying package sizes without physically changing the cylinder.
Quickly adjust the rear stroke screw by up to 30mm during product line changeovers, reducing setup downtime versus fixed-stroke SAI units.
The 30mm adjustment range is ideal for fine-tuning the retract end during machine setup or product changeover, avoiding the need to bolt on external stops. Because the stroke is 1000mm, the long unsupported rod requires an external guide to prevent excessive side-loading and premature seal wear.
When specifying a replacement, match the 100mm bore, 1000mm stroke, 30mm adjustment, PT tapered port thread, and carbon steel rod. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. This model is dimensionally interchangeable per ISO 15552 but uses a reduced mounting subset.
Quick checklist
At 0.7 MPa, the push force increases to 5497N.
The rear adjuster screw allows you to shorten the nominal 1000mm stroke by up to 30mm, creating a 970-1000mm travel window. This mechanical stop fine-tunes the end position but does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.