verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X1000-40

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X1000-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 1000mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke1000 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$390.14 $420.16Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X1000-40

It features a carbon steel piston rod and a PT tapered port. This model provides a usable travel window of 960 to 1000mm, letting you dial back the nominal 1000mm stroke by up to 40mm during commissioning.

The rear screw acts purely as a mechanical stop to set the end position and cannot hold a load without live air pressure. For load-holding requirements, consider the SAIL or BSAI variants. This extruded aluminum barrel includes sensor grooves on both sides, supporting AirTAC CMSE reed and DMSE electronic sensors if a magnet is added later.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X1000-40 Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X1000-40
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke1000 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X1000-40

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×1000Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X1000-40 Is Used

straighten

Long-Stroke Positioning

Ideal for moving large pallets or heavy fixtures over a 1000mm distance, with the 40mm rear adjuster allowing precise end-stop tuning at the machine frame.

settings_input_component

Product Changeover

Quickly adapt the effective travel from 960 to 1000mm to accommodate different product lengths on an assembly line without changing the pneumatic cylinder.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X1000-40 the Right Cylinder?

The 40mm adjustment range is ideal for fine-tuning long-stroke equipment setup or accommodating product changeovers without swapping the cylinder or adding external stops. It uses the reduced SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.

Because the stroke is 1000mm, the M20x1.5 rod requires external guiding to prevent excessive side-loading and binding. When replacing an ISO 15552 cylinder, match the 100mm bore, 1000mm stroke, PT port, and mounting style. Note that the plain SAIJ does not hold position without air; use a pilot-operated check valve or SAIL lock cylinder for static holding.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X1000-40 FAQ

At 0.7 MPa, the push force increases to 5497N.

The rear mechanical stopper allows you to trim the effective travel back by up to 40mm, creating a usable stroke window of 960 to 1000mm. The adjuster sets the end position but does not lock the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X1000-40

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X1000-40 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.