
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X1000-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 1000mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X1000-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 925 to 1000 mm usable travel window. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to add CMSE reed or DMSE electronic sensors exactly where needed.
This model uses a carbon steel piston rod with an M20x1.5 thread, paired with a G1/2 port for high airflow. The rear stopper lets you fine-tune the retract end position during commissioning or product changeovers without swapping the cylinder. Remember that this adjuster acts only as a travel stop and does not hold the load without live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X1000-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 925 to 1000 mm retract position on packaging lines when switching between different pallet or container sizes without adding external hard stops.
Fine-tune the end-of-travel position during initial commissioning of large equipment to achieve exact alignment over a 1-meter travel distance.
The 75 mm adjustment range is ideal for machinery requiring variable end-stops across different product sizes. Because the total stroke reaches 1000 mm, the extended rod is highly susceptible to side-loading; always use an external guide rail to prevent binding and premature seal wear.
For a direct ISO 15552 replacement match, verify a 100 mm bore, 1000 mm stroke, 75 mm adjuster, PT tapered port threads, and your required mounting style. SAIJ supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, deliberately omitting FB, CA, CB, and CR. If your application requires the load to be held mechanically without continuous air pressure, use an external rod lock or select an AirTAC SAIL or BSAI cylinder instead.
Quick checklist
At the maximum 1.0 MPa pressure, it achieves 801 kgf.
The rear adjusting screw acts as a mechanical stop that shortens the 1000 mm nominal stroke by up to 75 mm, giving you a usable travel window of 925 to 1000 mm. It only sets the end position and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.