verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X105-10

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X105-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 105mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke105 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$179.86 $195.69Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X105-10

The AirTAC SAIJ100X105-10 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.

This model uses a carbon steel piston rod with an M20x1.5 thread, paired with G1/2 PT ports and 36mm air cushions at both ends. The rear adjustment screw acts purely as a mechanical stop for end-position tuning and does not lock the load without live air pressure. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X105-10 Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X105-10
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke105 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X105-10

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×105Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X105-10 Is Used

settings_input_component

Machine Changeover

Dial in the exact 95-105mm retract position during product size changes without swapping out the entire actuator.

precision_manufacturing

Tooling Calibration

Fine-tune the end-stop during initial commissioning to perfect the seating pressure of large forming tools.

factory

Assembly Station Setup

Adjust the stroke window on the fly to accommodate minor variations in incoming part dimensions.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X105-10 the Right Cylinder?

The 10mm adjustable window is ideal for fine-tuning tooling positions on product changeovers without swapping the cylinder or adding external stops. For load-holding without continuous air pressure, consider an AirTAC SAIL or BSAI cylinder instead.

When replacing an ISO 15552 cylinder, match the 100mm bore, 105mm nominal stroke, 10mm adjustment, G1/2 PT ports, and your required mounting hardware. Because the stroke is relatively short at 105mm, side-load stress is minimal, but always ensure the M20x1.5 rod thread is aligned correctly to avoid binding.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X105-10 FAQ

The rear adjuster screw allows you to shorten the 105mm nominal stroke by up to 10mm, creating a 95-105mm usable travel window. The adjuster acts as a mechanical stop for position tuning and does not function as a lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X105-10

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X105-10 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.