
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X105-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 105mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a 25mm carbon steel piston rod and a G1/2 port. By integrating an external adjusting screw, this model allows you to trim the effective travel back by up to 100mm, creating a highly versatile 5-105mm usable stroke window.
This wide adjustment range is ideal for product-size changeovers on a line, letting you fine-tune the retract end position at commissioning without swapping the cylinder or bolting on external stops. The extruded aluminum barrel includes sensor grooves on both sides, and while this specific SKU lacks a magnet, adding an -S variant enables compatibility with AirTAC CMSE reed and DMSE electronic sensors. Remember that the rear adjuster acts purely as a travel stop and does not hold the load without live air.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X105-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the retract position from 5 to 105mm on the fly to accommodate different product lengths on the same production line without changing tooling.
Use the rear adjuster screw to precisely set the final end position during machine setup, avoiding the need for external mechanical stops.
Adjust the effective stroke window dynamically for pressing or forming applications that require different material depths per batch.
The SAIJ100X105-100 is selected over a fixed SAI model when a machine requires variable end-stops or frequent setup adjustments. To match an ISO 15552 replacement, verify the 105mm stroke, 100mm adjustment range, PT port thread, and mounting choice from the SAIJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the nominal stroke is relatively short at 105mm, side-loading is less of a concern than with longer strokes, but the robust 25mm rod still handles standard operational stresses well. For load-holding without live pressure, this cylinder is insufficient; you must integrate an external rod lock or pilot-operated check valve, or switch to a SAIL or BSAI model.
Quick checklist
If you increase the pressure to 0.7 MPa, the push force rises to 5497N.
The rear adjuster screw allows you to shorten the 105mm nominal stroke by up to 100mm, providing a usable travel window of 5 to 105mm. The adjuster functions as a mechanical stop to set the end position and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.