verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X105-20

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X105-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 105mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke105 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$179.86 $195.69Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X105-20

The AirTAC SAIJ100X105-20 is a double-acting ISO 15552 profile cylinder equipped with a rear mechanical adjuster, enabling you to trim the effective stroke within an 85 to 105 mm usable travel window. The extruded aluminum barrel features sensor grooves on both sides for straightforward detection integration.

This model features a standard carbon steel piston rod with an M20x1.5 thread, paired with G1/2 PT ports and 36 mm variable air cushions at both ends to manage kinetic energy. The rear stopper functions purely as a travel end-limit, meaning live air pressure must be maintained to hold the load securely; for dead-air load holding, a SAIL or BSAI variant is required.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X105-20 Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X105-20
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke105 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X105-20

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×105Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X105-20 Is Used

tune

End-Position Tuning

Dial in the exact retract distance within the 85-105 mm window during machine commissioning to perfect part seating without machining new spacers.

view_module

Product Changeover

Quickly adapt the cylinder stroke on packaging lines when switching to a slightly different carton size, using the rear screw to set the new end stop.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X105-20 the Right Cylinder?

Selecting this 100 mm bore over a smaller 80 mm option steps the thrust up significantly from 3518 N to 5497 N at 0.7 MPa, whereas dropping to a 63 mm bore would reduce it to 2182 N. An adjustable-stroke SAIJ is preferred over a fixed SAI when you need to fine-tune the retract end-position during commissioning or adapt to slight product size variations without physically swapping the cylinder or adding external stop blocks. When replacing an ISO 15552 cylinder, match the 100 mm bore, 105 mm stroke, 20 mm adjustment, G1/2 PT ports, and mounting style. SAIJ supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, but omits FB, CA, CB, and CR. Because this SKU lacks the -S suffix, it has no magnet and cannot host CMSE or DMSE sensors.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X105-20 FAQ

The rear adjuster acts as a mechanical stop that lets you shorten the nominal 105 mm stroke by up to 20 mm, providing an effective travel range of 85 to 105 mm. It only sets the travel end and does not lock the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X105-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X105-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.