
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X105-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 105mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a 25mm carbon steel piston rod and G1/2 PT tapered ports. By integrating a rear mechanical stopper, this model provides a usable travel window of 75-105mm, allowing you to trim the nominal 105mm stroke by up to 30mm during machine setup.
This adjuster functions strictly as an end-position stop for fine-tuning at commissioning, not as a load-holding lock; the cylinder requires live air to maintain its position. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches, though this specific SKU ships without a magnet. Mounting options are restricted to the SAIJ subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X105-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 75-105mm retract distance during format changes on packaging lines, avoiding the need to physically swap out cylinders for different package sizes.
Fine-tune the final end position during machine commissioning to achieve precise mechanical alignment without machining custom spacer blocks.
Adjust the rear stopper to accommodate minor variations in part dimensions on an assembly line, ensuring consistent clamping force.
Conversely, heavier loads may require the 125mm bore at 6136N. Because the 105mm stroke is relatively short, side-loading is less of a concern, but the 25mm rod and M20x1.5 thread still provide excellent rigidity for off-center loads.
Choose this adjustable variant over a fixed SAI cylinder when you anticipate product changeovers or need to dial in the exact retract distance during commissioning. To replace an ISO 15552 cylinder, match the 100mm bore, 105mm nominal stroke, 30mm adjustment range, G1/2 PT ports, and the appropriate mounting bracket. Remember that for dead-load holding without air pressure, you must employ an external rod lock or pilot-operated check valve, or switch to a SAIL or BSAI variant.
Quick checklist
The rear adjuster acts as a mechanical stop, allowing you to shorten the effective stroke from the nominal 105mm down to as little as 75mm. This provides a 75-105mm usable travel window for fine-tuning the retract end position without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.