
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X105-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 105mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
Its defining feature is a 40mm adjustment range that creates a precise 65-105mm usable travel window, allowing you to dial in the retract end-position without swapping out the entire unit.
This 100mm bore actuator features a robust 25mm carbon steel piston rod and a G1/2 PT port. It retains the standard extruded aluminum barrel with dual sensor grooves, though it omits the FB, CA, CB, and CR mounting styles found on some variants, supporting only Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X105-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 65-105mm retract position during machine setup, using the 40mm adjustment screw to fine-tune the stroke without external mechanical stops.
Quickly adapt the cylinder's effective travel on the fly when switching between different product sizes on a high-thrust assembly line.
Choose this 100mm bore actuator when an application demands high thrust that smaller bores cannot provide; stepping down to an 80mm bore drops the 0.5 MPa push force to 2513N. The 40mm adjustment screw is ideal for fine-tuning the retract end-stop during machine commissioning or product changeovers, eliminating the need to bolt on external stops. Because the rear adjuster acts strictly as a travel stop and not a lock, this cylinder cannot hold a load without live air pressure—consider an AirTAC SAIL or BSAI model if true load-holding is required.
To match this ISO 15552 interchangeable cylinder, verify your port size (G1/2 PT), mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2), and rod material (carbon steel). If electronic or reed position sensing is needed, note that this base unit lacks a magnet and requires a custom -S suffix to accept CMSE or DMSE switches.
Quick checklist
The rear adjuster acts as a mechanical stop that lets you shorten the nominal 105mm stroke by up to 40mm, providing an effective travel window of 65-105mm. It sets the end position but does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.