
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X105-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 105mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X105-40-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 65 to 105 mm. The PT tapered port threads and carbon steel piston rod ensure robust, leak-free operation in industrial environments.
Because this SKU includes the -S magnet option, it directly supports AirTAC CMSE reed and DMSE electronic solid-state sensors housed within the dual-side extruded barrel grooves. The rear mechanical stopper allows you to trim the effective stroke by up to 40 mm during commissioning without swapping the cylinder or adding external stops. Remember that this adjuster acts purely as a travel end stop and does not hold the load without live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X105-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 65 to 105 mm stroke window on the fly to accommodate different package sizes on a packaging line without changing cylinder hardware.
Fine-tune the retract position during machine commissioning to achieve exact alignment, using the 40 mm rear adjustment screw instead of external shims.
The adjustable 65 to 105 mm travel window is perfect for applications requiring variable end-stops or frequent product-size changeovers, offering setup flexibility that a fixed-stroke SAI cannot match. For load-holding without continuous air pressure, you must integrate an external rod lock or select a SAIL or BSAI model, as the SAIJ adjuster is not a locking mechanism.
To replace an ISO 15552 cylinder, match the 100 mm bore, 105 mm nominal stroke, 40 mm adjustment range, G3/8 port, and -S magnet. The SAIJ series supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, omitting FB, CA, CB, and CR. Although the 25 mm rod and M20x1.5 thread handle high side loads well, any stroke of 300 mm or longer requires an external guide to prevent rod binding.
Quick checklist
The rear adjuster acts as a mechanical stop that allows you to shorten the effective stroke by up to 40 mm. This creates a usable travel window of 65 to 105 mm, letting you fine-tune the end position at commissioning without replacing the cylinder.
At 0.7 MPa, the push force increases to 5497 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.