
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X105-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 105mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X105-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 55-105 mm usable travel window. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.
Equipped with a carbon steel piston rod and an M20x1.5 rod thread, this unit withstands demanding industrial environments. The rear stopper screw allows you to fine-tune the retract position at commissioning without swapping out the entire cylinder. It uses a PT tapered G1/2 port and variable air cushions at both ends to manage kinetic energy.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X105-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial the stroke back by up to 50 mm when running a new product size on the line, avoiding the need to physically swap cylinders for different formats.
Fine-tune the retract end-stop during machine commissioning to achieve perfect alignment without fabricating custom external spacers or shims.
The 50 mm adjustment range is highly beneficial for product changeovers, letting you dial in the exact end-stop mechanically rather than adding external stops or buying a fixed-stroke SAI cylinder. To replace an ISO 15552 cylinder, match the 100 mm bore, 105 mm stroke, PT G1/2 port, and mounting style.
Because the stroke is 105 mm, side-load risks are minimal, but always ensure the load is guided to prevent rod binding. Remember that the rear adjuster acts only as a travel stop, not a lock; the SAIJ cannot hold a load without live air pressure. For load-holding requirements, consider an AirTAC SAIL or BSAI cylinder. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
It features a rear adjusting screw that allows you to shorten the effective stroke by up to 50 mm. This creates a usable travel window of 55-105 mm, letting you set the exact retract position mechanically without changing the cylinder.
If you need higher force, it can safely operate up to 1.0 MPa, yielding 801 kgf of maximum push force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.