
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X105-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 105mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X105-75 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. The integrated rear stopper allows you to trim the effective travel anywhere within a 30 to 105mm window, providing exact end-position tuning without swapping hardware.
This adjustable-stroke design excels during machine commissioning and product changeovers, letting you dial in the precise stroke on the fly. The extruded aluminum barrel includes sensor grooves on both sides, and the system operates at speeds of 30-800mm/s. Fluid must be filtered to 40um, and the cylinder supports PT tapered port threading (G1/2) for straightforward integration.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X105-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Rapidly adapt to new package sizes on a packaging line by dialing the stroke back from 105mm down to 30mm without changing the cylinder.
Fine-tune the retract end-position during initial commissioning to achieve exact sensor triggering without adding external mechanical stops.
Provide flexible actuation endpoints for automated assembly equipment where multiple part heights are processed on the same station.
Choose this 100mm bore when an 80mm cylinder lacks sufficient thrust, as the 80mm variant yields 2513N at 0.5 MPa compared to this model's 3927N. The SAIJ100X105-75 is specified over a fixed SAI cylinder when your setup demands a variable end-stop, enabling on-the-fly stroke trimming up to 75mm. It utilizes a reduced mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options.
Remember that the rear adjuster functions strictly as a travel stop, not a locking device; it cannot hold a load without live air pressure. For dead-load holding, consider an external rod lock or the AirTAC SAIL or BSAI series. Because the 25mm rod handles side loads well, it still requires external guiding if subjected to lateral forces. When replacing an ISO 15552 unit, match the 100mm bore, 105mm stroke, 75mm adjustment, PT port, and mounting hardware.
Quick checklist
At 0.7 MPa, the push force increases to 5497N.
The rear adjuster acts as a mechanical stop that allows you to shorten the 105mm nominal stroke by up to 75mm. This creates a usable travel window between 30mm and 105mm, though it only sets the end position and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.