
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X105-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 105mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X105-75-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The built-in magnet supports position sensing via CMSE reed or DMSE electronic switches. By utilizing the 75mm adjustment screw, you can fine-tune the effective travel down from the 105mm nominal stroke, creating a highly versatile 30-105mm usable window.
This adjustable range is perfect for applications requiring frequent product changeovers, as it eliminates the need to physically swap cylinders or add external stops. The extruded aluminum barrel features sensor grooves on both sides for flexible switch mounting. It uses a G1/2 port and a durable 25mm carbon steel rod with an M20x1.5 thread, providing strong resistance against side loads. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X105-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance between 30 and 105mm during machine setup to accommodate different material thicknesses without changing hardware.
Rapidly adjust the stroke window on packaging lines when switching between different product sizes, minimizing downtime and avoiding external stop blocks.
The SAIJ100X105-75-S is selected specifically for its wide 30-105mm adjustable travel window, allowing operators to dial in the exact retract end-position during commissioning without swapping components. Because the stroke is relatively short, external side-load guides are less critical than with longer strokes, though the 25mm rod handles deflection well.
When integrating this cylinder, remember the rear adjuster acts strictly as a mechanical stop, not a locking device. The standard variable air cushions and the adjuster only decelerate and set the travel end; they will not hold a load without continuous live air pressure. For applications requiring true load-holding without pneumatic pressure, consider an AirTAC SAIL pneumatic lock, a BSAI clamp-lock cylinder, or an external rod lock. To replace an ISO 15552 cylinder, match the 100mm bore, 105mm stroke, 75mm adjustment, PT tapered G1/2 port, and the -S magnet option.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it can deliver up to 801 kgf of push force.
The rear adjusting screw acts as a mechanical stopper that allows you to trim the effective stroke back by up to 75mm from the 105mm nominal stroke. This creates a usable travel window of 30-105mm, enabling fine end-position tuning at commissioning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.