verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X110-20

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X110-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 110mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke110 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$179.86 $195.69Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X110-20

The AirTAC SAIJ100X110-20 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 110 mm stroke that can be fine-tuned down by 20 mm, yielding a precise 90-110 mm usable travel window for product changeovers.

This model features a standard carbon steel piston rod with an M20x1.5 thread and G1/2 PT ports. It retains the extruded aluminum barrel design with dual sensor grooves, but omits the FB, CA, CB, and CR mounting options found on some variants, utilizing a focused set of Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts. The rear screw acts purely as a travel stop for end-position tuning and must not be relied upon to hold loads without live air pressure.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X110-20 Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X110-20
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke110 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X110-20

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×110Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X110-20 Is Used

settings_input_component

Variable End-Stop Positioning

Dial in the exact retraction point between 90 and 110 mm during machine setup to accommodate different material thicknesses without changing the cylinder.

factory

Product Size Changeovers

Quickly adjust the travel end on automated lines processing varying product sizes, minimizing downtime between production runs.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X110-20 the Right Cylinder?

The adjustable stroke is ideal for commissioning fine-tunes without swapping hardware, unlike a fixed-stroke SAI cylinder. When matching ISO 15552 replacements, verify the 110 mm stroke, 20 mm adjuster, G1/2 port, and mounting style. Because the stroke is 110 mm, side-load risks are minimal, but external guides remain recommended for optimal rod alignment. For load-holding without live pressure, integrate an external rod lock or specify a SAIL or BSAI cylinder, as the SAIJ adjuster is not a locking mechanism.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X110-20 FAQ

At a maximum 1.0 MPa, it can deliver up to 801 kgf.

The rear adjuster screw allows you to shorten the effective stroke by up to 20 mm, creating a 90-110 mm travel window. This stopper sets the end position but does not lock the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X110-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X110-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.