
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X110-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 110mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X110-30 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, delivering robust performance for demanding pneumatic setups. The integrated rear stopper allows you to fine-tune the effective travel down to 80mm, creating a precise 80-110mm usable window without requiring external stops.
This model features a sturdy 25mm carbon steel piston rod with an M20x1.5 thread, paired with G1/2 PT tapered ports for reliable airflow. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. While the rear adjuster and variable air cushions control end-position deceleration, remember it is a travel stop rather than a load lock; for dead-air holding, consider SAIL or BSAI variants.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X110-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 80-110mm travel window on the fly to accommodate varying package sizes on a packaging line without changing cylinder hardware.
Achieve exact insertion depths during assembly operations by trimming the stroke up to 30mm to compensate for mechanical tolerances.
Use the rear stopper to safely set the precise end-of-stroke position during initial machine commissioning, preventing overtravel damage.
Selecting the SAIJ100X110-30 is ideal when your assembly requires exact end-position tuning during commissioning or frequent product changeovers, eliminating the need to swap out a fixed-stroke SAI cylinder. If your application demands less force, stepping down to an 80mm bore yields 2513N at 0.5 MPa, whereas moving up to a 125mm bore provides 6136N.
To match this ISO 15552 dimensionally interchangeable cylinder, confirm the 100mm bore, 110mm stroke, 30mm adjustment range, G1/2 PT ports, and standard carbon steel rod without a magnet. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Since this unit operates at a 110mm stroke, side-load risks are minimal, but ensure alignment to maximize seal life.
Quick checklist
The rear adjuster acts as a mechanical stop, allowing you to shorten the 110mm nominal stroke by up to 30mm. This creates a usable travel window of 80-110mm, which can be fine-tuned during setup without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.