
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X110-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 110mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X110-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 100 mm bore and a 110 mm nominal stroke, yielding a usable travel window of 70-110 mm. This built-in adjustability allows precise end-position tuning during commissioning without swapping hardware.
This variant includes a magnetic piston for position sensing and uses a standard carbon steel rod with a PT tapered port thread. The extruded aluminum barrel integrates sensor grooves on both sides, supporting AirTAC CMSE reed and DMSE electronic switches. The rear stopper acts purely as a travel end, meaning the load is not held without live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X110-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 70-110 mm travel window on the fly to accommodate different package sizes on a packaging line without changing out the cylinder.
Fine-tune the retract position during machine commissioning to achieve exact clamping depth, utilizing the 40 mm adjustment range for perfect alignment.
If your setup demands less thrust, stepping down to an 80 mm bore yields 2513 N at 0.5 MPa. Choose this adjustable SAIJ over a fixed SAI model when you need to fine-tune the retract distance during product changeovers rather than machining external stops. For load-holding without continuous air pressure, integrate an external rod lock or select a SAIL or BSAI variant.
As a dimensionally interchangeable ISO 15552 profile cylinder, it matches standard mounting footprints. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. The robust 25 mm carbon steel rod and M20x1.5 thread handle high side loads, though long unsupported strokes still require external guiding. Operating speed ranges from 30-800 mm/s.
Quick checklist
The rear adjuster acts as a mechanical stop that trims the effective travel. For this model, the 110 mm nominal stroke can be dialed back by up to 40 mm, resulting in a usable 70-110 mm travel window. Note that this stopper does not lock the load without live air pressure.
At 0.9 MPa, the push force increases to 7068 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.