
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X110-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 110mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X110-75 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. The extruded aluminum barrel features sensor grooves on both sides, allowing for flexible switch placement when needed.
This model features a nominal 110mm stroke paired with a 75mm adjustment range, yielding a highly flexible usable travel window of 35-110mm. The rear screw stopper lets you dial in the exact retract end position during commissioning without adding external stops. It uses a G1/2 port and a 25mm carbon steel rod, while the mounting hardware is limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2 options.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X110-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Handle varying product sizes on a single line by dialing the retract stroke anywhere between 35mm and 110mm without swapping hardware.
Fine-tune the exact stopping point of a heavy press or clamp during machine commissioning using the built-in rear stopper.
The 75mm adjustment range is exceptionally wide, allowing a single cylinder to handle multiple product sizes on a changeover-driven line. Because the stroke is 110mm, you remain well under the 1500mm maximum standard stroke, keeping it as a readily available stock item.
When integrating this cylinder, remember the rear adjuster acts strictly as a travel stop, not a locking device. The cylinder cannot hold a load without live air pressure; for fail-safe load holding, consider the SAIL or BSAI variants. If you need position sensing, adding the -S magnet option allows the use of AirTAC CMSE reed or DMSE electronic sensors.
Quick checklist
It features a rear screw stopper that allows you to reduce the effective stroke by up to 75mm. With a nominal stroke of 110mm, this gives you a usable travel window of 35-110mm to fine-tune the end position without external stops.
If pressure is increased to 0.7 MPa, the push force rises to 5497N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.