verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X115-10

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X115-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 115mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke115 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$179.86 $195.69Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X115-10

It features a 25mm carbon steel piston rod and a G1/2 port. By turning the rear screw, you can trim the effective travel back by up to 10mm, creating a precise 105-115mm usable stroke window without needing external stops.

This adjustable-stroke design is dimensionally interchangeable per ISO 15552 and uses a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches, though this specific SKU is supplied without a magnet.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X115-10 Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X115-10
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke115 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X115-10

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×115Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X115-10 Is Used

precision_manufacturing

Machine Setup Fine-Tuning

Dial in the exact 105-115mm retract end-stop during initial machine commissioning to perfect part seating without machining new spacers.

view_module

Product Size Changeover

Quickly adapt the cylinder's effective travel window on packaging lines when switching to a slightly different product format.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X115-10 the Right Cylinder?

If your setup needs less force, stepping down to an 80mm bore yields 4523N at 0.9 MPa. The 10mm adjustment range is ideal for fine-tuning the retract position during commissioning or product changeover, avoiding the need to swap out a fixed-stroke SAI cylinder.

Because the rear adjuster functions strictly as a travel stop and the air cushions only manage deceleration, this cylinder cannot hold a load without live air pressure. For dead-load holding, consider an AirTAC SAIL or BSAI locking cylinder. To match this ISO 15552 replacement exactly, confirm the 115mm stroke, 10mm adjustment, PT tapered port thread, and the absence of the -S magnet option.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X115-10 FAQ

The rear adjuster acts as a mechanical stop that lets you shorten the nominal 115mm stroke by up to 10mm, providing a usable travel window of 105-115mm. It only sets the travel end and does not lock the load without live air pressure.

At 0.9 MPa, the push force increases to 7068N.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X115-10

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X115-10 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.