
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X115-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 115mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a carbon steel piston rod and PT tapered port threads. The generous 100mm adjustment range on this 115mm nominal stroke creates a highly versatile 15-115mm usable travel window, ideal for prototypes or assemblies requiring exact end-position tuning.
This adjustable stopper allows you to dial in the retract position precisely during commissioning without adding external stops or swapping cylinders. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches, though this specific SKU is configured without a magnet. Remember that the rear screw acts strictly as a travel stop and does not hold the load without live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X115-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 115 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×115 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance from 15 to 115mm during product line changeovers without physically replacing the cylinder or adding shims.
Use the 100mm adjustment range to fine-tune the end position during initial commissioning, accommodating prototype variations or assembly tolerances.
Selecting the SAIJ100X115-100 makes sense when you need substantial thrust but require on-the-fly end-position tweaking, stepping down from a 125mm bore (6136N at 0.5 MPa) to avoid oversized pneumatics. It provides a wide 15-115mm travel window, letting you fine-tune the retract distance during machine setup or product changeovers rather than committing to a fixed-stroke SAI cylinder. For load-holding without continuous air pressure, you would need to integrate an external rod lock or switch to a SAIL or BSAI model, as the adjuster here is purely a mechanical stop.
When replacing an ISO 15552 cylinder, verify the 100mm bore, 115mm stroke, 100mm adjustment range, G3/8 port, and your required mounting style. SAIJ supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, omitting FB, CA, CB, and CR options. Because the 25mm rod and M20x1.5 thread handle significant side loads, ensure your setup uses proper external guiding for smooth operation.
Quick checklist
At 0.7 MPa, the push force increases to 5497N.
The rear adjuster screw allows you to shorten the effective stroke by up to 100mm. With the 115mm nominal stroke, this creates a usable travel window of 15-115mm, letting you set the exact retract end position without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.