
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X115-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 115mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X115-40 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This built-in adjustability allows you to dial in the exact retract end position at commissioning without swapping hardware.
This model uses a G1/2 port and a 25mm carbon steel rod with an M20x1.5 thread. The extruded aluminum barrel includes sensor grooves on both sides, though this specific SKU omits the magnet, meaning CMSE or DMSE switches cannot be used without modification. For load-holding without live air pressure, consider the SAIL or BSAI variants, as the rear adjuster functions strictly as a travel stop and not a locking device.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X115-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 115 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×115 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within the 75-115mm window during machine setup to achieve precise positioning without machining new spacers.
Quickly adjust the stroke by up to 40mm on a packaging line when switching to a different product size, minimizing downtime between runs.
Utilize the built-in rear stopper to create flexible end-stops for testing fixtures, replacing the need for external mechanical stop blocks.
The 40mm adjustment range is highly beneficial for product-size changeovers on a line, allowing variable end-stops without adding external physical stops. When replacing an ISO 15552 cylinder, match the 100mm bore, 115mm stroke, G1/2 PT port, and mounting style.
Mounting options for the SAIJ series include Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR. Because the nominal stroke is 115mm, side-load risks are minimal, but the 25mm rod and M20x1.5 thread provide robust resistance to minor deflection. Remember that the rear screw sets the travel end and the air cushions decelerate the load, but neither will hold the load safely without continuous air pressure.
Quick checklist
At 0.7 MPa, the push force increases to 5497N.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 115mm nominal stroke by up to 40mm. This creates a usable travel window of 75-115mm, which can be fine-tuned during commissioning without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.