verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X115-40S

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X115-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 115mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke115 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$185.09 $201.27Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X115-40S

The AirTAC SAIJ100X115-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This built-in adjustability allows you to fine-tune end positions at commissioning without adding external stops.

This variant includes a magnet for CMSE reed and DMSE electronic sensors, which seat neatly into the sensor grooves on both sides of the extruded aluminum barrel. It uses a G1/2 port and a 25mm carbon steel rod with an M20x1.5 thread. The rear adjuster acts purely as a mechanical stop to set the travel end and does not hold the load without live air pressure.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X115-40S Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X115-40S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke115 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X115-40S

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×115Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X115-40S Is Used

tune

Product Changeovers

Dial in the 75-115mm travel window on the fly to accommodate different product lengths without physically swapping out the cylinder.

precision_manufacturing

End-Position Tuning

Use the rear stopper to micro-adjust the retract stroke during machine commissioning, ensuring precise mechanical alignment.

factory

Variable End Stops

Ideal for automated lines where the final resting position of the tooling needs occasional tweaking based on wear or material variances.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X115-40S the Right Cylinder?

The 40mm adjustment range is particularly useful for product-size changeovers on a line, letting you shift the retract end-stop dynamically rather than swapping to a fixed-stroke SAI cylinder. For load-holding without continuous air pressure, you would need to look at the SAIL or BSAI variants, as the SAIJ adjuster is not a locking mechanism.

When replacing an ISO 15552 cylinder, match the 100mm bore, 115mm stroke, 40mm adjustment, G1/2 PT port, and the -S magnet requirement. Mounting options for this profile cylinder include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the 25mm rod and M20x1.5 thread handle high side loads well, this model is robust, though any long unsupported stroke still requires an external guide.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X115-40S FAQ

At its maximum operating pressure of 1.0 MPa, it can deliver up to 801 kgf.

The rear mechanical screw allows you to shorten the 115mm nominal stroke by up to 40mm, creating a usable travel window of 75-115mm. This stopper sets the travel end but does not lock or hold the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X115-40S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X115-40S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.