
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X115-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 115mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X115-50 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 115 mm travel by up to 50 mm. This yields a highly flexible 65-115 mm usable stroke window, perfect for dialing in exact end positions during commissioning without swapping hardware. It features a robust 25 mm carbon steel piston rod and a G1/2 PT port.
The extruded aluminum barrel incorporates sensor grooves on both sides for straightforward positioning feedback. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR configurations.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X115-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 115 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×115 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adjust the 65-115 mm travel window to accommodate different package sizes on a packaging line without changing out the cylinder.
Fine-tune the retract end-position during initial commissioning to achieve precise mechanical alignment without adding external stopper blocks.
Dial in the exact stroke needed for pressing or clamping operations where material thickness varies between production runs.
Select this 100 mm bore actuator when an application demands high thrust combined with variable end-stops for product size changeovers. Here, the 50 mm adjustment screw lets you fine-tune the retract position on the fly, whereas a fixed SAI cylinder would require physical spacers or a completely new unit to alter the travel.
Because the stroke is 115 mm, side-load risks are minimal, but always guide the load externally for optimal bearing life. Remember that the rear adjuster functions strictly as a travel stop, not a lock, so the cylinder cannot hold a load without live air. For dead-air load holding, consider an AirTAC SAIL or BSAI cylinder, or an external rod lock. This SKU uses a standard carbon steel rod, PT threaded port, and no magnet.
Quick checklist
If pressure is increased to 0.9 MPa, the push force scales up to 7068 N.
The rear adjuster screw acts as a mechanical stop that lets you shorten the 115 mm nominal stroke by up to 50 mm, creating a 65-115 mm usable travel window. It is a travel stop only, not a lock, and the cylinder still requires live air to maintain position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.