
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X115-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 115mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X115-75-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. The integrated rear stopper allows you to trim the nominal 115 mm stroke back by up to 75 mm, creating a highly flexible 40 to 115 mm usable travel window for precise end-position tuning.
This adjustable capability eliminates the need to swap cylinders or bolt on external stops during product changeovers. The extruded aluminum barrel provides sensor grooves on both sides for CMSE reed and DMSE electronic switches. With a 25 mm carbon steel rod and M20x1.5 thread, it handles substantial side loads, while the PT tapered port threads ensure a secure pneumatic connection.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X115-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 115 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×115 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the stroke from 40 to 115 mm on the fly to accommodate different package sizes on a packaging line without changing the cylinder.
Fine-tune the end-of-stroke position during machine commissioning to find the exact travel distance needed before finalizing the design.
Use the wide 75 mm adjustment range to alter the retracted position dynamically for varying material thicknesses in a clamping station.
Choose this 100 mm bore cylinder when an application demands high thrust combined with variable end-stops, stepping up from a 80 mm bore that yields 2513 N at 0.5 MPa. The 75 mm adjustment range is exceptionally wide, making it ideal for prototyping or machinery processing multiple product sizes on a single line. For fixed-position tasks without changeover needs, a standard SAI cylinder is simpler. When specifying an ISO 15552 replacement, match the 100 mm bore, 115 mm stroke, 75 mm adjust, PT port threads, and the -S magnet option.
Because the 115 mm stroke is relatively short, unsupported rod sag is minimal, but heavy off-center loads still require an external guide. Note that the rear adjuster acts only as a travel stop; it does not hold the load without live air. For dead-end load holding, consider an AirTAC SAIL or BSAI cylinder. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
At 0.7 MPa, the push force increases to 5497 N.
The rear adjuster acts as a mechanical stop that allows you to shorten the 115 mm nominal stroke by up to 75 mm. This creates a usable travel window of 40 to 115 mm, enabling precise end-position tuning without swapping the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.