
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X120-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 120mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
Because this SKU carries a 100mm adjustment code on a 120mm nominal stroke, it yields a highly versatile 20-120mm usable travel window. This extreme adjustability allows operators to dial in the exact retract end-position during commissioning without swapping hardware.
The bore dictates a G1/2 PT port and a robust 25mm carbon steel rod with an M20x1.5 thread, providing excellent resistance against side loads. As an extruded aluminum profile cylinder, it is dimensionally interchangeable per ISO 15552. The reduced SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR options.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X120-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 120 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×120 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Rapidly reconfigure the retract distance from 20mm up to 120mm on packaging lines handling different container sizes without changing the cylinder.
Dial in the exact end-position during machine commissioning, using the 100mm adjustment range to find the optimal travel before finalizing mechanical stops.
Replace fixed-stop SAI cylinders in assembly stations where the rear contact point must be shifted on the fly to accommodate multiple part families.
The massive 100mm adjuster on a 120mm stroke is specifically valuable for prototyping cells or machinery processing varying product sizes, where the retract end-stop must change frequently. If your cycle demands holding the load statically without live air pressure, note that the rear adjuster functions only as a travel stop, not a lock; you should specify an SAIL or BSAI cylinder instead.
When replacing an ISO 15552 cylinder, match the 100mm bore, 120mm nominal stroke, 100mm adjustment range, G1/2 PT port, and desired mounting hardware. Since this unit lacks the -S suffix, it has no magnet and cannot host CMSE or DMSE sensors. The 25mm rod handles moderate side loading well, but for this 120mm stroke, ensure the load is guided externally to prevent binding.
Quick checklist
At 0.7 MPa, the push force increases to 5497N.
The rear adjuster screw acts as a mechanical stop, allowing you to trim the effective travel from the 120mm nominal stroke down to as little as 20mm. It sets the retract end-position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.