
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X120-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 120mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X120-20 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, delivering robust thrust for heavy pneumatic tasks. By integrating an external adjusting screw, this model provides a usable travel window of 100 to 120mm, allowing you to shorten the effective stroke by up to 20mm without swapping hardware.
This fine-tuning capability is ideal for dialing in retract end positions during machine commissioning or product changeovers. The extruded aluminum barrel features sensor grooves on both sides for straightforward detection mounting, while the variable air cushions at both ends manage deceleration. Remember that the rear stopper sets the travel limit but does not function as a load lock; live air pressure is required to hold position.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X120-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 120 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×120 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within the 100-120mm window during machine setup to perfect part seating without adding external mechanical stops.
Quickly adjust the stroke by up to 20mm on the production line to accommodate different material thicknesses or package sizes on the fly.
You would choose the SAIJ adjustable-stroke variant over a fixed SAI model when you need on-the-fly end-position tuning to accommodate varying product sizes on a line, saving the effort of machining external stops. For direct compatibility, match the 100mm bore, 120mm stroke, 20mm adjustment, G1/2 port, and mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Since this configuration omits the -S magnet option, position sensing via CMSE or DMSE switches is not supported without modification.
If your setup demands holding a load without continuous air pressure, a plain SAIJ cylinder will not suffice, as the adjuster and cushions only decelerate travel. In those cases, consider an external rod lock or explore AirTAC SAIL or BSAI locking cylinders. Because the 120mm stroke is relatively short, side-loading risks remain manageable, though the robust 25mm rod and M20x1.5 thread naturally handle higher bending loads than smaller bores.
Quick checklist
The SAIJ100X120-20 features a rear adjusting screw that acts as a stopper, allowing you to trim the nominal 120mm stroke back by up to 20mm. This creates a usable travel window of 100 to 120mm, which can be fine-tuned at commissioning without changing the cylinder.
At the maximum pressure of 1.0 MPa, it can deliver up to 801 kgf of push force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.