
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X120-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 120mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a 25mm carbon steel piston rod and a G1/2 PT port. By integrating an external stopper screw, this model allows you to fine-tune the retract end position during commissioning without swapping out the entire unit.
With a 120mm nominal stroke and a 30mm adjustment code, the effective usable travel window spans 90 to 120mm. This specific SKU utilizes an extruded aluminum barrel with dual sensor grooves rather than a tie-rod design. If position detection is later required, you must specify the -S magnet option to utilize AirTAC CMSE reed or DMSE electronic sensors.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X120-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 120 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×120 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 90-120mm travel window during format changes to accommodate different package sizes without repositioning cylinder mounts.
Fine-tune the retract position during machine commissioning to achieve precise mechanical alignment without adding external spacers.
The adjustable 90-120mm travel window is perfect for product-size changeovers on a line, giving you a variable end-stop that a fixed-stroke SAI cannot match. When ordering a replacement, verify the 100mm bore, 120mm stroke, 30mm adjustment, G1/2 port, and mounting style. SAIJ supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, omitting FB, CA, CB, and CR.
Remember that the rear adjuster functions strictly as a travel stop, not a locking device. This cylinder cannot hold a load without continuous live air pressure. If your application requires true load-holding upon air loss, consider the SAIL pneumatic lock or BSAI clamp-lock series instead.
Quick checklist
At 0.7 MPa, the push force increases to 5497N.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 120mm nominal stroke by up to 30mm. This creates a usable travel window of 90-120mm for fine-tuning the end position at commissioning.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.