
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X120-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 120mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X120-40 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. By integrating a 40mm adjustment mechanism at the rear end, this model allows you to trim the 120mm nominal stroke down to a minimum of 80mm, creating a highly versatile 80-120mm usable travel window for precise product changeovers.
This adjustable design eliminates the need to swap entire cylinders or bolt on external stops when fine-tuning end positions at commissioning. It features a 25mm carbon steel piston rod with an M20x1.5 thread, providing excellent side-load resistance, and utilizes a G1/2 port. The extruded aluminum barrel includes sensor grooves on both sides, ready to accept CMSE reed or DMSE electronic switches if a magnet is specified later.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X120-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 120 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×120 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 80-120mm travel window during machine setup to accommodate different material thicknesses without physically replacing the actuator.
Quickly adjust the rear stopper on a packaging line to deflect varying box sizes on the fly, ensuring precise positioning at transfer points.
Trim the stroke by up to 40mm during initial commissioning to perfect the mechanical timing of a press without adding external stopper blocks.
The SAIJ100X120-40 is selected specifically for its 40mm adjustment range, enabling variable end-stops without changing the cylinder. Mounting options are limited to the SAIJ subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets.
When ordering a replacement, match the 100mm bore, 120mm stroke, 40mm adjust code, PT tapered port thread, and carbon steel rod. Because the stroke is under 300mm, external side-load guides are less critical than on longer strokes, though the M20x1.5 rod still handles offset loads well. Remember that the rear adjuster acts strictly as a travel stop, not a lock; the cylinder cannot hold a load without live air, so consider an AirTAC SAIL or BSAI model if true mechanical load-holding is required.
Quick checklist
At the maximum rated pressure of 0.9 MPa, the push force increases to 7068N.
The rear adjuster screw acts as a mechanical stop that allows you to shorten the 120mm nominal stroke by up to 40mm, providing an effective travel window of 80-120mm. It only sets the end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.