
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X120-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 120mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X120-75 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 120 mm stroke that can be dialed back by up to 75 mm, yielding a highly flexible 45-120 mm usable travel window for precise end-position tuning at commissioning.
The carbon steel piston rod features an M20x1.5 thread, providing a robust interface for mounting attachments. The rear adjuster acts purely as a mechanical stop to set the retract position and cannot hold a load without continuous air pressure. For load-holding requirements without live air, consider the SAIL or BSAI variants. This extruded aluminum barrel design includes sensor grooves on both sides for straightforward positioning of CMSE and DMSE switches.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X120-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 120 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×120 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial in the retract distance from 45 to 120 mm when switching between product sizes on a packaging line, eliminating the need for manual spacer adjustments.
Fine-tune the final resting position during machine commissioning to achieve exact clamping or pressing forces without re-machining hard stops.
Adjust the bottom-out position on a light-duty press operation to accommodate different material thicknesses on the fly using the rear screw stopper.
The SAIJ100X120-75 is chosen over a fixed-stroke SAI when product changeovers require shifting the end-stop without physically swapping cylinders or adding external stops. To replace an existing ISO 15552 cylinder, match the 100 mm bore, 120 mm stroke, 75 mm adjustment range, PT port thread, and desired mounting hardware.
Because the stroke adjustment mechanism consumes part of the cylinder length, ensure your machine envelope accommodates the overall physical dimensions. This model supports a reduced set of mounting options including Basic, FA, LB, TC, FTC, TCM1, and TCM2. Although the 120 mm stroke is relatively short, always ensure proper alignment to avoid excessive side loading on the M20x1.5 rod thread.
Quick checklist
At a maximum 0.9 MPa, the push force increases to 7068 N.
The rear mechanical adjuster allows you to shorten the effective stroke by up to 75 mm from the 120 mm nominal length. This creates a usable travel window of 45 to 120 mm, enabling precise end-position tuning without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.