
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X125-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 125mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
By integrating a 75mm adjustment mechanism onto a 125mm nominal stroke, it creates a highly flexible 50-125mm usable travel window. This allows operators to dial in the exact retract end-position during commissioning without swapping out the entire unit.
It features a robust 25mm carbon steel piston rod and a G1/2 PT port. The extruded aluminum barrel includes sensor grooves on both sides for straightforward switch placement. For mounting flexibility, this series supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 attachments, deliberately omitting FB, CA, CB, and CR brackets.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X125-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly reconfigure the 50-125mm travel window for varying part lengths on a packaging line without changing the cylinder.
Fine-tune the retract position during machine commissioning to achieve exact alignment without adding external shims.
Adjust the rear mechanical stop on the fly for custom material bending depths in light fabrication tasks.
The 75mm adjustment range is ideal for product-size changeovers on a line, letting you shift the retract stop dynamically rather than installing fixed external stops. Since the stroke is 125mm, side-load risks are minimal, but always guide the load for smooth operation.
Remember that the rear adjuster functions strictly as a travel stop, not a locking mechanism. It cannot hold a load without continuous live air pressure. If your application requires true fail-safe load holding, consider the SAIL pneumatic lock series, the BSAI clamp-lock variant, or an external pilot-operated check valve.
Quick checklist
It uses a rear adjusting screw to mechanically stop the piston short of its full travel. For this model, the 75mm adjustment on a 125mm nominal stroke yields a usable travel window of 50-125mm, allowing precise retract-position tuning.
At 0.7 MPa, the push force increases to 5497N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.